Remove the pentalobe screws.
Prepare the opening picks.
Tape over cracked areas for safety.
Attach the anti-clamp tool.
Release the anti-clamp handles.
Insert the opening pick carefully.
Warm the lower edge with a heat gun or dryer.
Apply the suction handle.
Lift the display gently.
Separate adhesive from the frame.
Insert pick tools to loosen edges.
Detach suction bump from the panel.
Fully separate the display.
Unscrew battery connectors.
Disconnect the battery from logic board.
Remove logic board screws.
Disconnect the LCD display flex cables.
Begin reassembly with new display.
Remove screws securing speaker module.
Transfer proximity sensor and flood illuminator module.